Power Treads™ | Battery Replacement

NOTE: Make sure the main power switch is set to OFF prior to changing the batteries. Ask a parent or adult for help. To install or change your Power Treads™ batteries:

1. Remove the treads that wrap the outside of your Power Treads ™ all-surface vehicle.
2. Turn your Power Treads™ over to locate the battery compartment door on the bottom.
3. Use a Phillips screwdriver (not included) to remove the screw on the battery compartment door.
4. Insert 2 x “AAA” batteries according to the diagram. Ensure that the positive and negative polarities match the illustrations inside the battery compartment.
5. Replace the battery compartment door and replace the screw using the screwdriver. Do not over-tighten. 
6. Snap the treads that wrap your Power Treads™ all surface vehicle back into place.